Install Crankshaft Bearing; Install Crankshaft Bearing No.2; Install Crankshaft Thrust Washer Upper - Toyota 2002 Camry Service Manual

2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE MECHANICAL –
32.

INSTALL CRANKSHAFT BEARING

(a) Install the upper bearing with an oil groove on cylinder
block.
NOTICE:
Clean the back side of the bearing and the bearing surface
of the cylinder block and let not stick the oils and fats.
A53029
33.

INSTALL CRANKSHAFT BEARING NO.2

(a) Install the lower bearing on bearing cap.
NOTICE:
Clean the back side of the bearing and the bearing surface
of the bearing cap and let not stick the oils and fats.
A33379
34.

INSTALL CRANKSHAFT THRUST WASHER UPPER

(a) Install the 2 thrust washers under the No. 3 journal posi-
tion of the cylinder block with the oil grooves facing out-
ward.
A13501
35. INSTALL CRANKSHAFT
(a) Apply engine oil to upper bearing and install the crank-
shaft on the cylinder block.
(b) Apply engine oil to lower bearing.
(c) Examine the front marks and install the bearing caps on
the cylinder block.
(d) Apply a light coat of engine oil on the threads and under
the bearing cap bolts.
A13502
CYLINDER BLOCK (2AZ–FE)
Author :
14–133
Date :
1657