Generator Assy (1Mz-Fe) Replacement - Toyota 2002 Camry Service Manual

GENERATOR ASSY (1MZ–FE)
REPLACEMENT
A
2. INSTALL GENERATOR ASSY
(a) Temporarily install the bolt A and B.
(b) Adjust the V–ribbed belt tension by tightening the adjusting bolt C. (See page 14–136)
(c) Tighten the bolt A and B.
Torque:
Bolt A 58 N m (592 kgf cm, 43 ft lbf)
Bolt B 18 N m (184 kgf cm, 13 ft lbf)
(d) Install the lead wire from terminal B.
Torque: 9.8 N m (100 kgf cm, 7 ft lbf)
3. INSPECT DRIVE BELT DEFLECTION AND TENSION(REFERENCE) (Seee page 14–136)
2002 CAMRY REPAIR MANUAL (RM881U)
STARTING & CHARGING –
1. REMOVE GENERATOR ASSY
(a) Disconnect the generator connector.
C
(b) Remove the nut, and disconnect the lead wire from termi-
nal B.
(c) Loosen the bolt A and B.
(d) Loosen the bolt C to lessen the tension of the drive belt.
(e) Remove the bolt A, B and the generator.
B
A62387
GENERATOR ASSY (1MZ–FE)
Author :
19–33
1902Y–02
Date :
1905