OVERHAUL
HINT:
z
COMPONENTS: See page
z
Overhaul the RH side by the same procedures with LH side.
1.
REMOVE REAR WHEEL
2.
DRAIN BRAKE FLUID
NOTICE:
Wash off the brake fluid immediately if it comes into contact with a painted surface.
5.
REMOVE TENSION SPRING
(a)
Remove the tension spring from the front brake shoe and rear brake shoe.
SST
2002 CAMRY REPAIR MANUAL (RM881U)
BRAKE
–
REAR DRUM BRAKE
32–38
3.
REMOVE REAR BRAKE DRUM SUB–ASSY
HINT:
If the brake drum cannot be removed easily, do the following
steps.
(a)
Insert a bent wire or equivalent through the hole in the
brake drum, and hold the automatic adjusting lever away
from the adjuster.
(b)
Using a screwdriver, reduce the brake shoe adjustment
R00285
by turning the adjuster.
(c)
Remove the rear brake drum sub–assy.
4.
INSPECT BRAKE DRUM INSIDE DIAMETER
(a)
Using a brake drum gauge or equivalent, measure the in-
side diameter of the drum.
Standard inside diameter: 228.0 mm (8.976 in.)
Maximum inside diameter: 230.6 mm (9.079 in.)
F06408
6.
SEPARATE PARKING BRAKE SHOE STRUT SET LH
(a)
Using SST, disconnect the shoe return spring and sepa-
rate the parking brake shoe strut set LH.
SST
NOTICE:
Do not damage the wheel cylinder boot.
BR1534
09703–30010
Author :
32–39
320D5–01
Date :
2027