Table of Contents
Advertisement
10–12
Removal & Installation and Disassembly & Reassembly
1.
DRAIN COOLANT(See page 16–20)
2.
REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE
(a)
Disconnect the MAF meter connector.
(b)
Disconnect the VSV connector for canister closed valve (CCV) and the air hose.
(c)
Disconnect the 4 vacuum hoses and the ventilation hose.
(d)
Remove the air cleaner cap with the hose.
3.
REMOVE FRONT SUSPENSION UPPER BRACE CENTER
(W/ FRONT SUSPENSION BRACE UPPER CENTER)
5.
REMOVE E.F.I. THROTTLE POSITION SENSOR
(a)
Remove the 2 set screws and throttle position sensor.
2002 CAMRY REPAIR MANUAL (RM881U)
ENGINE CONTROL SYSTEM
4.
REMOVE THROTTLE BODY ASSY
(a)
Disconnect the throttle position sensor connector.
(b)
Disconnect the throttle control motor connector.
(c)
Disconnect the 2 water bypass hoses.
A60474
(d)
Remove the 2 bolts, 2 nuts. throttle body and gasket.
A60482
6.
INSTALL E.F.I. THROTTLE POSITION SENSOR
(a)
Check that the throttle valve is under the condition of the
opener opening angle (about 7_).
A59525
–
THROTTLE BODY ASSY (1MZ–FE)
Author :
10067–01
Date :
1442
Advertisement
Table of Contents
