Table of Contents
Advertisement
17–8
LUBRICATION SYSTEM (1MZ–FE)
ON–VEHICLE INSPECTION
1.
CHECK ENGINE OIL LEVEL
(a)
After warm up the engine and then 5 minutes after the engine stop, oil level should be between the
low level and full level marks of the dipstick.
If low, check for leakage and add oil up to the full level mark.
NOTICE:
Do not fill with engine oil above the full level mark.
Recommended Viscosity (SAE):
10W–30
5W–30 PREFERRED
°F –20
0
20
40
°C
–29
–18
–7
4
TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
Oil Pressure Switch
Oil Pressure
Gauge
5.
WARM UP ENGINE
2002 CAMRY REPAIR MANUAL (RM881U)
LUBRICATION
2.
(a)
If the quality is visibly poor, replace the oil.
60
80
100
16
27
38
B00319
B00319
3.
(a)
(b)
A52637
4.
(a)
B04132
–
LUBRICATION SYSTEM (1MZ–FE)
CHECK ENGINE OIL QUALITY
Check the oil for deterioration, entry of water, discoloring
or thinning.
Oil grade:
API grade SJ or SL, Energy–Conserving or ILSAC,
multigrade engine oil is recommended. SAE 5W–30 is
the best choice for your vehicle, for good fuel econo-
my, and good starting in cold weather.
REMOVE OIL PRESSURE SWITCH ASSY
Disconnect the oil pressure switch connector.
Remove the oil pressure switch.
INSTALL OIL PRESSURE GAUGE
Install the oil pressure gauge.
Author :
17020–02
Date :
1854
Advertisement
Table of Contents
