Install Tapi Service Provider - Toshiba STRATA CTX100 Installation And Maintenance Manual

Install TAPI Service Provider

This Desktop Open Application Interface (OAI) section provides step-by-step instructions for
installing the software application.
1. Insert the Strata CTX WinAdmin Application Software and Documentation Library CD-ROM
into your CD-ROM drive. From the Main Menu, click Install TSP.
2. Follow the on-screen instructions. Toshiba recommends that default settings be used, but
alternate paths, program groups, etc., are offered to meet your specific needs.
3. When the Toshiba CTX TSP Configuration screen displays
(shown right), type in the following information:
•
Login Name: Use any name you desire.
•
Password: Optional, leave blank if not needed.
•
Extension: Primary DN of connected DKT3000 phone.
•
Hostname: Typically this is "localhost."
4. (Optional) Click on Configure Keys. This section enables
you to use more useful names for the line appearances on
your phone. If you do not change their name, StrataLink
shows the line appearances as FB1 through FB20. Only the
20 feature keys of the main phone can be selected for TAPI
dialing, using a specific appearance.
5. Click OK to save your entries. An error box displays and
you need to click OK again.
6. Click Cancel on the Toshiba CTX TSP
Configuration screen to continue. The Add to
Startup group screen displays (shown right).
7. If you want the Toshiba CTX TAPI Service Provider
program added to the Startup group, click Yes.
8. The installation continues. On the last screen, click
Finish.
9. Restart PC to complete the installation.
Strata CTX I&M 10/02
Station Apparatus
Install TAPI Service Provider
8-11