13 Authentication and Account Administration
Configuration for Account Administration
This section explains how to configure the machine to use the account administration
feature.
The following shows the reference section for each item.
Step 1 Selecting an Accounting Type
Use the following procedure to select an accounting type.
For information on relationships between the authentication and accounting modes, refer to
"Relationships Between the Authentication and Accounting Modes" (P.297)
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or a keyboard, and
select [Enter].
When a passcode is required, select [Next Input] and enter the system administrator's
passcode, then select [Enter].
Note
3
Select [Tools].
4
Select [Accounting].
5
Select [Accounting Type].
6
Select an accounting type, and select [Save].
Note
Refer to "Accounting Type" (P.199).
Step 2 Registering User Information
Use the following procedure to register user information.
13
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or a keyboard, and
select [Enter].
When a passcode is required, select [Next Input] and enter the system administrator's
passcode, then select [Enter].
Note
3
Select [Tools].
4
Select [Accounting].
5
Select [Create/View User Accounts].
6
Select "(Not in Use)" and select [Create/Delete].
316
Step 1 Selecting an Accounting Type .......................................................................................316
Step 2 Registering User Information ........................................................................................316
• The default user ID is "11111".
• The default passcode is "x-admin".
• The available options are [Local Accounting], [Network Accounting], and [Xerox Standard
Accounting].
• The default user ID is "11111".
• The default passcode is "x-admin".