Ldap Server/Directory Service - Xerox DocuCentre-III C4100 Manual

5 Tools
Note
Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
The default value is 88.
Important • Do not use the numbers assigned to the other ports.
Domain Name
When using Active Directory of Windows 2000 Server or Windows Server 2003, set the
domain name of Active Directory in [Domain Name]. Up to 64 characters are allowed.
Important • Enter a realm name with capital letters. Otherwise, an authentication error occurs.

LDAP Server/Directory Service

Configure the directory server, authentication method, and search attributes and ranges for
LDAP authentication and address book search by LDAP.
Primary Server Name/IP Address
Enter the primary server name or IP address.
Note
5
Primary Server Port Number
Set the Primary server port number in the range from 1 to 65535.
The default value is 389.
Important • Do not use the numbers assigned to the other ports.
Secondary Server Name/IP Address
Enter the secondary server name or IP address.
Note
Secondary Server Port Number
Set the secondary server port number in the range from 1 to 65535.
The default value is 389.
Important • Do not use the numbers assigned to the other ports.
Authentication Method
Select the method for LDAP authentication from [Direct Authentication] and [Authentication of
User Attributes].
Direct Authentication
User ID and password entered by user are used for LDAP authentication.
Authentication of User Attributes
The entered User ID is used as an attribute value specified in [Attribute of Types User Name]
for a search on a LDAP server. [Attribute of Login User Name] of a user that is found through
the search is used for LDAP authentication.
Attribute of Typed User Name
When [Authentication of User Attributes] is used for LDAP authentication, set an attribute of
User ID entered by user. Up to 32 characters are allowed.
Set the attribute of the LDAP server that corresponds to the value to be entered as the user
name from the control panel. For example, when you want the mail address to be entered, set
"Mail."
144
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in
the range of 0 to 255.
• For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where
"xxxx" is a hexadecimal value.
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in
the range of 0 to 255.
• For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where
"xxxx" is a hexadecimal value.
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value in
the range of 0 to 255.
• For IPv6, enter the address in the format "xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx", where
"xxxx" is a hexadecimal value.