Original Size Defaults; Reduce/Enlarge Presets; Custom Colors - Xerox DocuCentre-III C4100 Manual

5 Tools
Annotations - Comment on Side 2
You can tune the position to print a comment finely.
Date Stamp - Position on Side 2
You can tune the position to print a date stamp finely.
Page Numbers - Position on Side 2
You can tune the position to print a page number finely.
Bates Stamp - Position on Side 2
You can tune the position to print a bates stamp finely.
Maximum Number of Sets
Set the maximum number of allowed copy sets between 1 and 999. Users will not be able to
specify the number of copy sets larger than the value set here.

Original Size Defaults

Set the original sizes that appear in [Original Size] in the [Layout Adjustment] screen.
Original sizes can be assigned to the buttons other than [Auto Detect].
5
When frequently making copies of non-standard size originals, by presetting the non-
standard size, you can save time to enter the original size each time a copy is made.
A/B Series Size
You can select from sizes of A and B series.
Inch Size
You can select from sizes of inch series.
Others
You can select from other sizes.
Custom Size
You can enter any size. Set the width (X) from 15 to 432 mm, and the height (Y) from 15 to
297 mm in 1 mm increments.

Reduce/Enlarge Presets

Set the magnifications shown in [Preset %] in [Reduce/Enlarge] in the [Copy] screen.
You can assign any magnification to the R/E Preset buttons.

Custom Colors

Set the custom colors used for [Single Color] and [Dual Color] in the [Output Color]
screen.
You can assign custom colors with yellow (0 to 100%), magenta (0 to 100%), and cyan
(0 to 100%) to each of custom color buttons 1 to 6.
Note
132
• Adjust so that the total of yellow, magenta, and cyan does not exceed 240%.