Xerox DocuCentre-III C4100 Manual page 443

4
After removing the staple cartridge,
check inside of the finisher for any
remaining staples.
5
Pull up the metal part of the staple
cartridge as shown in the figure.
6
Remove the jammed staples (1),
and return the metal part pulled up
in step 5 to the original position (2).
CAUTION
Be careful in removing jammed
staples.
7
Return the staple cartridge to its
original position until it clicks into
place
8
Close the front cover of the finisher.
Note • If the front cover is not completely closed, a message will appear and the machine will not
operate.
Stapler Faults
2
1
441
14