The Copy Result Is Not What Was Expected - Xerox DocuCentre-III C4100 Manual

The Copy Result is Not What was Expected

Follow the procedure below if the copy result is not what was expected.
Symptom
The copy is dirty. The document glass or the
The copy is too
dark or light.
The color of the
original and the
copy is different.
The copy is
slightly
misaligned.
Part of the image
is missing on the
copy.
Cause
document cover is dirty.
The document is a
transparent type such as a
transparency film.
The document is colored,
rough, or a blueprint.
The document is glossy
printing paper.
The copy density is set to
[Darken] or [Lighten].
The original document
density is too light.
The setting for [Original
Type] is inappropriate for
the document.
The color gradation is
shifted.
The original type selected is
not suitable.
Paper is misaligned in the
tray.
The paper is damp.
Folded or wrinkled paper is
included in the paper tray.
The document is pasted or
folded.
Trouble during Copying
Remedy
Clean the document glass or the document
cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.62).
If the document is transparent, dirt on the
document cover may be copied. Place a
white sheet of paper over the original
document when copying.
The paper's background color is copied.
Adjust the copy density or image quality, or
specify for [Background Suppression].
Glossy printing paper easily sticks to the
document glass, and shadows are
sometimes copied and reproduced as dirt.
Place a transparency film under the
document when copying.
Adjust the copy density.
Refer to "3 Copy" > "Image Quality" in the
User Guide.
Adjust the copy density.
Refer to "3 Copy" in the User Guide.
Copy black text. If it is too light, select
[Text] for [Original Type].
Refer to "3 Copy"> "Image Quality" in the
User Guide.
Adjust the gradation.
Refer to "Executing Calibration" (P.65).
Set the suitable value for the [Original
Type].
Refer to "3 Copy"> "Image Quality" >
"Original Type (Selecting the Document
Type)" in the User Guide.
Align the paper edges, and adjust them
with the tray's front corners to reload the
paper.
Refer to "Loading Paper" (P.29).
If the paper is damp, the copy image may
be partially missing or unclear. Replace the
paper with new one.
Refer to "Loading Paper" (P.29).
Remove the improper paper or replace
whole paper with new one.
Refer to "Loading Paper" (P.29).
The folded or pasted part of the document
may not touch the document glass. Place a
stack of white sheets on the document to
remove a gap.
14
331