Xerox DocuCentre-III C4100 Manual page 365

Category
Error Code
C P F S M O
012-211
012-212
012-213
012-221
012-223
012-224
012-225
012-226
012-227
012-228
012-229
012-230
012-231
012-232
012-233
012-234
012-241
012-242
012-243
012-244
012-247
012-249
012-252
012-253
012-254
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
Cause and Remedy
O [Cause] Finisher malfunction
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
O [Cause] Finisher malfunction
[Remedy] Turn the machine off and on. If the error persists, contact
our Customer Support Center.
O [Cause] The sensor was activated because paper output to the
finisher was removed before the finisher tray lowered and
completely stopped in position. Or, there is a foreign object
under the finisher tray.
[Remedy] If there is any foreign object under the finisher tray, remove it
and then turn the machine off and on. If the error persists,
contact our Customer Support Center.
Error Code
14
363