Xerox DocuCentre-III C4100 Manual page 404

14 Problem Solving
Error Code
C P F S M O
027-523
027-524
027-525
027-526
027-527
027-528
14
027-529
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
402
Category
O [Cause]
[Remedy] Take one of the following actions:
O [Cause]
[Remedy] Check if the specified name is being used for another file
O [Cause]
[Remedy] Check whether or not the file is not being used by another
O [Cause]
[Remedy] If any lock directory (.LCK) exists in the forwarding
O [Cause]
[Remedy] Check whether or not the file is not being used by another
O [Cause]
[Remedy] Check if the save location has free space.
O [Cause]
[Remedy] Log in to the server from another computer using the same
Cause and Remedy
During the transfer using [SMB] of the [Scan to PC]
feature, a lock folder could not be created on the SMB
server due to the following reason:
The specified lock folder already exists.
If any lock directory (.LCK) exists in the forwarding
destination, manually delete it, and then try again.
Check if the same name is being used for another folder.
During the transfer using [SMB] of the [Scan to PC]
feature, a folder could not be created on the SMB server
because the specified folder already exists.
or folder on the SMB server.
During the transfer using [SMB] of the [Scan to PC]
feature, a file could not be deleted from the SMB server
due to one of the following reasons:
The file does not exist.
The file is opened.
The specified file name is being used as a directory.
user at the specified save location.
During the transfer using [SMB] of the [Scan to PC]
feature, a lock folder could not be deleted from the SMB
server due to one of the following reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
destination, manually delete it, and then try again.
During the transfer using [SMB] of the [Scan to PC]
feature, a folder could not be deleted from the SMB server
due to one of the following reasons:
The file does not exist.
The directory is not empty.
The specified directory name does not exist.
user at the specified save location.
During the transfer using [SMB] of the [Scan to PC]
feature, no space is available at the save location on the
SMB server.
During the transfer using [SMB] of the [Scan to PC]
feature, an unexpected error has occurred on the SMB
server, or an unexpected internal error has occurred on
the machine.
user name, to see if a file can be written into the same
save location on the server. If the error persists, it may be
an internal error. Contact our Customer Support Center.