Xerox DocuCentre-III C4100 Manual page 414

14 Problem Solving
Error Code
C P F S M O
033-747
033-749
033-750
033-751
033-755
034-211
034-212
034-500
034-501
034-505
034-506
14
034-507
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
412
Category
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] Turn the machine off and on. Try again. If the error
O [Cause]
[Remedy] No operation is necessary. The machine will output the
O [Cause]
[Remedy] Take one of the following actions:
If the error persists, contact our Customer Support Center.
O [Cause]
[Remedy] Contact our Customer Support Center.
O [Cause]
[Remedy] Check the phone number, and try again.
O [Cause] Unable to communicate because the specified telephone
[Remedy] Check the telephone line, and try again.
O [Cause]
[Remedy] Turn the machine off and on. If the error persists, contact
O [Cause]
[Remedy] Check if the destination machine has the remote copy
O [Cause]
[Remedy] Check the password and the phone number.
Cause and Remedy
The job is in pending status.
The machine will automatically resume and print out.
An error occurred during fax transmission.
persists, contact our Customer Support Center.
An activity report output occurred during the printer lockout
duration. Outputting the activity report was suspended
because the machine was in Sleep mode.
report after exiting the Sleep mode.
A fax document was to be printed, but the print job was
canceled because the fax feature did not work.
If multiple documents stored in mailboxes are to be
printed, and one of them is a fax document, the fax
document and the documents to be printed subsequently
will not be printed out.
Turn the machine off and then back on.
Check if the phone cable connection is secured.
Print an Error History Report to obtain the fax-related
error code (133-xxx, 134-xxx), and then solve the
problem.
An error occurred on the fax control system.
Unable to communicate due to an incorrect phone
number.
line does not exist.
An error occurred during fax transmission.
our Customer Support Center.
The destination machine does not have the remote copy
feature (for printing the multiple sets of a received
document).
feature.
The specified password is not identical with the ID number
of the destination machine.
The destination machine may be set not to send its ID
number. Check the setting of the destination machine.
This error code also appears when polling is rejected.