Xerox DocuCentre-III C4100 Manual page 331

Symptom
The output is When the Tray 5 (Bypass) is
entirely faint. used, the size and type of
the loaded paper are
different from the settings
on the print driver.
Two or more sheets may be
fed at once.
Paper becomes The paper is unsuitable.
wrinkled.
Paper has been added to
the loaded paper.
The paper is damp.
Text is blurred. The paper is unsuitable.
Paper has been added to
the loaded paper.
The paper is damp.
White or color A drum cartridge has
patches appear deteriorated or is damaged.
vertically.
There is no toner left in a
toner cartridge.
Text or images The paper guides in the
are printed at an paper tray are not set in the
angle. correct positions.
Cause
Load correct paper into the Tray 5
(Bypass).
Refer to "Loading Paper in the Tray 5 (Bypass)"
(P.30).
Fan the paper well and load it again.
Refer to "Loading Paper" (P.29).
Replace the paper with new one.
Refer to "Loading Paper" (P.29).
Replace the paper with new one.
Refer to "Loading Paper" (P.29).
Replace the drum cartridge with a new
one.
Refer to "Replacing the Drum Cartridge"
(P.48).
Replace the toner cartridge with a new
one.
Refer to "Replacing the Toner Cartridges"
(P.42).
Adjust the horizontal and vertical paper
guides to the correct positions.
Refer to "Loading Paper" (P.29).
Image Quality Trouble
Remedy
329
14