Overwrite Hard Disk; Print Mode; Multi-Poll Report; Job Flow Error Report - Xerox DocuCentre-III C4100 Manual

Multi-poll Report

You can check the result of a multi-poll communication (polling from multiple
recipients). The remote terminal name and transmission result/status are recorded.
If this report is set to be printed automatically, it is printed each time when a multi-poll
transmission is complete.
For information on specifying whether or not to have the report printed automatically, refer to
"Broadcast/Multi-Poll Report" (P.115).
Relay Broadcast Report
You can check the result of a relay broadcast transmission.
If this report is set to be printed automatically, it is printed each time when a relay
broadcast transmission is complete.
For information on specifying whether or not to have the report printed automatically, refer to "Relay
Broadcast Report" (P.115).
File Transfer Report - Fax Server
This report is output after image data scanned by the machine is sent to a Server Fax
server via a network. It contains the scanned document image and the transmission
result. To have the report printed, enter the System Administration mode.
For information on specifying whether or not to have the report printed automatically, refer to "File
Transfer Report - Fax Server" (P.116)

Job Flow Error Report

You can check the errors caused in the job flow. The date and time when the error
occurred and the error codes are recorded.
For information on specifying whether or not to have the report printed automatically, refer to "Job Flow
Error Report" (P.116).

Overwrite Hard Disk

You can check the overwriting status of the hard disk. The indication "Overwriting"
shows that the overwriting is in progress. "Standby" shows the completion of the
overwriting process.
Note • This feature does not appear for some models. An optional package is necessary. For more
• [Overwrite Hard Disk] appears only when [Overwrite Hard Disk] is enabled in [System
1
Select [Overwrite Hard Disk].
2
Check the overwriting status of the
hard disk.

Print Mode

You can change and register each setting in the print mode.
Note • The items displayed vary depending on the options installed.
1
Select [Print Mode].
information, contact our Customer Support Center.
Settings]. For more information, refer to "Overwrite Hard Disk" (P.212).
Machine Information
4
83