Xerox DocuCentre-III C4100 Manual page 51

3
Remove the drum cartridge from
the machine.
Note • When replacing the drum
cartridge, make sure that the
new cartridge is the correct
one specified for the machine.
4
Take a new drum cartridge out of the box, and put the used drum cartridge into a
supplied plastic bag and then into the box.
Important • Do not place the new drum cartridge in an upright position.
• Return used drum cartridges to our Customer Support Center.
5
Carefully remove the protective
sheet from the cartridge.
6
Place the cartridge in position,
aligning the guides. Push the slider
on the top edge all the way to the
end marker to insert the drum
cartridge. Remove the cartridge
container.
7
Rotate the drum cartridge release
lever (R1) 90 degrees
anticlockwise to lock the cartridge
in position.
8
Completely remove the ROS
cleaner (R4) from the machine.
Replacing Consumables
49
3