Xerox DocuCentre-III C4100 Manual page 193

3
With the numeric keypad, enter the
address number (001 to 099) or
group dial number (#01 to #09) for
the broadcast destination, and
select [Add].
Note • If there is more than one
broadcast destination,
continue by entering another
address number or group dial
number, and pressing [Add].
4
To print a document also at the relay station, under [Print at Relay Station] select [On].
Billing - Day Time, Billing - Night Time, Billing - Midnight
Set the connection time for one unit charge in each of the time bands (daytime/nighttime/
midnight).
You can set the value from 0.1 to 255.9 seconds in 0.1 second increments.
This item appears when the auditron mode for the fax service is enabled. For information on how to
enable the feature, refer to "Auditron Mode" (P.199).
The registered details can be confirmed by printing the [Billing Data List]. For information about how to
print, refer to "Billing Data List" (P.80).
1
Enter the System Administration mode.
For details on how to enter the System Administration mode, refer to "System Settings Procedure"
(P.92).
2
Select one of [Billing - Day Time], [Billing - Night Time], and [Billing - Midnight], and
select [Change Settings].
3
Select [No Billing] or [Billing].
4
When [Billing] is selected, using the
keyboard displayed on the screen
or the numeric keypad on the
control panel, enter the time for one
unit charge (0.1 to 255.9 seconds
in 0.1 second increments).
5
Select [Save].
6
Exit the System Administration mode.
Internet Fax Profile
Set the format of the Internet Fax profile.
A profile is specified to restrict attribute information such as the image resolution and paper
size for transmissions between Internet Fax-compatible machines.
TIFF-S
This profile is the Internet Fax standard. For documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.
Setup & Calibration
5
191