Xerox DocuCentre-III C4100 Manual page 496

15 Appendix
Meter Counts for 2-Sided Printing
Job Counter Report
When you have specified two or more different [Multiple-up] settings using the Build
Job feature, the numbers of pages for [2-up] and [Other than 2-up] displayed on Job
Counter Reports are calculated according to the latest N-up setting you specified.
Example 1)
When you select [2 sheets
Document 2 (2 pages), both Documents 1 and 2 are set to [No] and the number of
printed pages is calculated as follows:
Example 2)
When you select [No] for Document 1 (4 pages) and [2 sheets
Document 2 (2 pages), both Documents 1 and 2 are set to [2 sheets
and the number of printed pages is calculated as follows:
The numbers of pages for 2in1, 4in1, and 8in1 are also calculated in the same way as
above on ApeosWare Accounting Service.
The meter on the [Billing Information] screen calculates the number of printed pages
correctly regardless of the [Multiple-up] setting.
Addresses Registered on Job Flows
When an abbreviated number or address registered on Address Book has been used
for a job flow creation on the machine, any number of address change on Address Book
will not be reflected to the job flow. To send to the changed address, the address
registered on the job flow must be directly changed.
Print Job Speed at Control Panel Operation
If your DocuCentre has an optional full size color UI, the process or output speed of
print jobs may be reduced if you operate the control panel or check print job status on
the [Job Status] screen while performing a print job.
15
494
When printing 2 sided, depending on the application the machine uses, blank sheets
can be inserted automatically to adjust pages. Such blank sheets inserted by the
application are also counted by the meter.
Total pages: 4
2 up: 0
Total pages: 5
2 up: 5
1 sheet (2-up)] for Document 1 (4 pages) and [No] for
1 sheet (2-up)] for
1 sheet (2-up)]