Replacing The Stamp Cartridge - Xerox DocuCentre-III C4100 Manual

3 Maintenance
3
Empty the container.
4
Insert the empty hole punch waste
container all the way into the
finisher.
3
5
Close the front transport cover and the top cover of the finisher.
Note

Replacing the Stamp Cartridge

If the machine offers the Fax service, replace the stamp cartridge when stamp
impressions start to fade.
Important • Do not touch the ink pad of the stamp cartridge. If it comes into contact with your skin, wash
Note
1
Pull up the knob on the left cover of
the document feeder, and open the
document feeder cover completely.
2
Pull up the green lever to open the
inner cover.
60
• If the front cover of the finisher is not completely closed, a message will appear and the
machine will not operate.
immediately.
• Problems caused by using consumables not recommended by Fuji Xerox are not covered by
the maintenance service contract.
• Before using consumables, carefully read the instructions and precautions on the packaging.
• We recommend having spare consumables ready.
• To order a staple cartridge, contact our Customer Support Center.
(Product name: Stamp Replacement Kit (red), Product code: F451)