Xerox DocuCentre-III C4100 Manual page 172

5 Tools
Direct (P2P)
Directly sends to the machine with the Internet Fax feature, without using an SMTP server.
Broadcast Internet Fax Profile
Set the default value for Internet Fax profile when carrying out an Internet Fax broadcast
send.
A profile is specified to restrict attribute information such as image resolution and paper size
for transmissions between Internet Fax-compatible machines.
Important • The supported TIFF-file profiles depend on the destination Internet Fax-compatible machine.
TIFF-S
This profile is the Internet Fax standard. For documents that are larger than A4, the size is
reduced automatically to A4 for transmission.
TIFF-F
Select this profile when you specify super-fine for the resolution or when you send A3 or B4
documents.
TIFF-J
Select this profile for sending documents in JBIG.
Broadcast Starting Rate
Set the default value for communications mode of the Internet Fax Broadcast Send feature.
5
Delivery Confirmation Method
Set the default value for the method of confirming that a transmitted Internet Fax has arrived
at its destination.
Note
Delivery Receipts
You can confirm whether the Internet Fax you sent was delivered to the destination
successfully.
Read Receipts
You can confirm whether the Internet Fax including attachments you sent was processed
properly at the recipient.
Incoming Internet Fax Print Options
Set the print operation to be enabled when e-mail that is sent to the machine's e-mail address
is received from a machine with the Internet Fax feature.
Attachment
Only prints the attached documents.
Full Headers and Message
Prints the e-mail header and body of the e-mails.
When you select [Print S/MIME Information], S/MIME Information is also printed.
Basic Headers and Message
Prints the basic headers (From/To/Subject/Date) and the contents of e-mails.
When you select [Do not print if no message], the machine prints only e-mail that has
contents.
Internet Fax Output Destination
Set the output tray to be used for printed Internet Fax documents.
Note
170
Before specifying a profile, check that it is supported on the destination machine.
• You can select [Delivery Receipts] when the destination machine supports the DSN feature.
You can use [Read Receipts] when the destination machine supports the MDN feature.
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.