Scan Service Settings; First Tab; Scan Defaults - Xerox DocuCentre-III C4100 Manual

Scan Service Settings

Make settings relating to the scanner feature.
Note • This feature does not appear for some models. An optional package is necessary. For more
• When [Fax Server] is selected in the System Settings, [Scan Service Settings] is replaced
For information on scanner environment settings, refer to "Scanner Environment Settings" (P.249).
The following shows the reference section for each item.

First Tab ................................................................................................................................... 157

Scan Defaults............................................................................................................................ 157

Scan to PC Defaults.................................................................................................................. 159
Original Size Defaults .............................................................................................................. 159
Output Size Defaults ................................................................................................................ 160
Reduce/Enlarge Presets ............................................................................................................ 160
Other Settings........................................................................................................................... 160
1
Select [Tools].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.92).
2
Select [Scan Service Settings].
3
Select the item to be set or changed.
First Tab
You can set items relating to the First ([E-mail]/[Scan to Mailbox]/[Network Scanning]/
[Scan to PC]) screen display.
Feature in 2nd Column
You can set the features that appear in the second column from the left of the [General
Settings] screen.
You can select from [2 Sided Scanning], [Resolution], [Lighten/Darken], and [Reduce/
Enlarge].
Reduce/Enlarge - Buttons 2 - 4
This item can be set when [Reduce/Enlarge] is selected in [Feature in 2nd Column].
Select the magnification from the registered R/E Preset buttons.
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.160).
Scan Defaults
Set the default values for the scanner feature. When the power is turned on or the
machine returns from a Power Save mode, or when the <Clear All> button is pressed,
the system returns to the defaults set here. By setting features you often use as
defaults, you can avoid extra operations required in use.
The values set become valid after the power has been turned off and on again.
information, contact our Customer Support Center.
with [Scan/Fax Service Settings].

Scan Service Settings

157
5