Xerox DocuCentre-III C4100 Manual page 422

14 Problem Solving
Error Code
C P F S M O
036-780
036-781
036-782
036-783
036-784
036-785
036-786
036-787
036-788
036-789
036-790
036-791
036-792
036-793
036-795
036-796
036-797
036-798
036-799
047-211
047-214
14
047-216
062-210
O
062-211
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
420
Category
O [Cause]
[Remedy] Check the settings and the phone number, and send the
O [Cause] Unable to communicate due to an incorrect password.
[Remedy]Enter the correct password, and try again. If the problem
O [Cause]
[Remedy] Call the destination to check the condition, and try again.
O [Cause]
[Remedy] Refer to this Administrator Guide to operate the machine
O [Cause]
[Remedy] Check the settings and the phone number, and send the
O [Cause]
[Remedy] Check if the destination machine has the remote copy
O [Cause]
[Remedy] No operation is necessary.
O [Cause]
[Remedy] Check the settings and the phone number, and send the
O [Cause]
[Remedy] Power-cycle the machine. If the problem persists, contact
O [Cause]
[Remedy] Power-cycle the machine. If the problem persists, contact
O [Cause]
[Remedy] Power-cycle the machine. If the problem persists, contact
O [Cause]
[Remedy] Contact our Customer Support Center.
O [Cause]
[Remedy] Contact our Customer Support Center.
Cause and Remedy
An error occurred during fax transmission.
fax again. If the error persists, contact our Customer
Support Center.
persists, contact our Customer Support Center.
The machine sent a polling request, but the destination
machine does not have target documents.
Unable to communicate due to incorrect operation.
correctly.
An error occurred during fax transmission.
fax again. If the error persists, contact our Customer
Support Center.
The destination machine does not have the remote copy
feature (for printing the multiple sets of a received
document).
feature.
The document was faxed with normal transmission,
because the destination machine does not have the
remote copy feature (for printing the multiple sets of a
received document).
An error occurred during fax transmission.
fax again. If the error persists, contact our Customer
Support Center.
Offset output tray error
our Customer Support Center.
Duplex unit error
our Customer Support Center.
Finisher error
our Customer Support Center.
Document feeder malfunction
An error occurred in the document feeder.