Xerox DocuCentre-III C4100 Manual page 326

14 Problem Solving
Documents are
often jammed.
A corner of the
document is
folded.
Stapler Faults
14
324
Symptom Cause
Are the suitable types of
documents used?
Are you trying to copy
irregular shaped
documents, business cards,
transparencies, or thin
documents?
Are you trying to copy
documents with sticky
labels, paper clips or
adhesive tape?
Are the document guides in
the correct positions?
Is a piece of torn paper
remaining in the document
feeder?
Is the [Mixed Sized
Originals] setting set to [On]
when you copy originals of
different sizes?
Is an A5 document loaded
in landscape orientation
( ) on the document
feeder when the Mixed
Sized Originals feature is in
use?
Is the document curled?
-
Remedy
Correctly load documents suitable for the
document feeder.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Remove sticky labels, paper clips or
adhesive tape from the document before
copying.
Adjust the document guide positions.
Refer to "3 Copy" > "Copying Procedure" in
the User Guide.
Open the document feeder cover and
check inside.
Refer to "Document Jams" (P.436).
Set [Mixed Sized Originals] to [On].
Refer to "3 Copy" > "Layout Adjustment" >
"Mixed Sized Originals (Scanning Different
Size Documents Simultaneously)" in the User
Guide.
Load the A5 document in portrait
orientation ( ).
Flatten out the curl and load the document
again.
Refer to "Stapler Faults" (P.438).