Optional Components - Xerox DocuCentre-III C4100 Manual

15 Appendix

Optional Components

The following are the principal options available. To purchase these options, contact
our Customer Support Center.
Finisher-A1
Finisher-B1
Booklet Maker Unit for
Finisher-B1
US 2/3 Hole Punch Kit for
Finisher-B1
2/4 Hole Punch Kit for
Finisher-B1
HCF B1
HDD Extension Kit
Extension System Memory
(512 MB)
Searchable PDF Kit
Adobe PostScript 3 Kit
Data Security Kit
Scanner Kit
Fax Kit
Fax Extension Board Kit
Server Fax Kit
Internet Fax Kit
Stamp Kit
Chinese Font ROM Kit
Attention Light II
15
Note
456
Product Name
Staples output sheets.
Staples output sheets.
Staples or hole-punches output sheets. Also folds output
sheets in half or staples them.
Staples or 2/3 hole-punches output sheets.
The spacing between the 2 punch holes of US 2/3 Hole Punch
Kit is 70 mm, which differs from that of 2/4 Hole Punch Kit
(spacing is 80 mm).
Staples or 2/4 hole-punches output sheets.
High capacity document feeder. Allows you to load up to 2,000
sheets of paper.
Provides the extended copy features and adds the spool and
scanner features.
Increases the system memory by 512 MB respectively.
Allows you to use optical character recognition (OCR) when
scanning.
Allows you to use the machine as a PostScript printer. Also
enables printing from Macintosh.
Enhances the security of data written to the hard disk.
Adds the scan feature to the machine.
Adds the fax feature to the machine.
Adds extra facsimile lines to the machine.
Adds the Server Fax feature to the machine.
Adds the Internet Fax feature to the machine.
Allows you to stamp each sheet of a document to mark
successfully scanned sheets.
Supports Chinese fonts.
Emits light when the machine receives a document or an error
occurs in the machine.
• The optional components are subject to change without notice.
• For the latest information, contact our Customer Support Center.
Description