Scan Service Settings; Scan Defaults - Xerox WorkCentre 5230A System Administration Manual

Scan Service Settings

This section describes the features that allow you to configure or change machine
settings specific to the scan features. For more information, refer to the following.
NOTE: When the Server Fax service is enabled, [Scan Service Settings] is displayed
as [Scan/Fax Service Settings].
Scan Defaults – page 105
Scan to PC Defaults – page 107
Original Size Defaults – page 107
Output Size Defaults – page 108
Reduce/Enlarge Presets – page 108
Other Settings – page 109
1.
Select [System Settings], and
then select [Scan Service
Settings] in the [Group] menu.

Scan Defaults

This feature allows you to configure or change various default settings for the scan
features.
1.
Select [Scan Defaults] in the
[Features] menu.
2.
Change the required settings.
Use the scroll buttons to switch
between screens.
3.
Select [Close].
Color Scanning (WorkCentre 5225A/5230A)
Specifies the default for the [Color Scanning] feature on the [General Settings] screen.
Original Type
Specifies the default for the [Original Type] feature on the [General Settings] screen.
File Format
Specifies the default for the [File Format] feature on the [E-mail Options] / [Filing
Options] screen.
Optimize PDF For Fast Web View
Specifies the default status of the [Optimize PDF For Web View] check box that is
displayed for the [PDF Multiple Pages per File] option of the [File Format] feature on
the [E-mail Options] / [Filing Options] screen. Select [On] to place a check mark in the
check box by default.
Lighten/Darken
Specifies the default for the [Lighten/Darken] feature in [Image Options] on the
[Advanced Settings] screen.
System Settings
105