Foundry Networks Switch and Router Installation And Configuration Manual page 545

Switch and router
Table of Contents

Advertisement

Table 15.18: Web Display of IP Traffic Statistics – Layer 3 Switch (Continued)
This Field...
Active Resets
Passive Resets
Input Errors
In Segments
Out Segments
Retransmission
RIP statistics
The RIP statistics are derived from RFC 1058, "Routing Information Protocol".
Requests Sent
Requests Received
Responses Sent
Responses Received
Unrecognized
Bad Version
Bad Address Family
Bad Request Format
Bad Metrics
Bad Response Format
Resp Not From RIP Port
Response From Loopback
Packets Rejected
December 2000
Displays...
The number of TCP connections this device reset by sending a TCP
RESET message to the device at the other end of the connection.
The number of TCP connections this device reset because the device
at the other end of the connection sent a TCP RESET message.
This information is used by Foundry customer support.
The number of TCP segments received by the device.
The number of TCP segments sent by the device.
The number of segments that this device retransmitted because the
retransmission timer for the segment had expired before the device at
the other end of the connection had acknowledged receipt of the
segment.
The number of requests this device has sent to another RIP router for
all or part of its RIP routing table.
The number of requests this device has received from another RIP
router for all or part of this device's RIP routing table.
The number of responses this device has sent to another RIP router's
request for all or part of this device's RIP routing table.
The number of responses this device has received to requests for all
or part of another RIP router's routing table.
This information is used by Foundry customer support.
The number of RIP packets dropped by the device because the RIP
version was either invalid or is not supported by this device.
The number of RIP packets dropped because the value in the
Address Family Identifier field of the packet's header was invalid.
The number of RIP request packets this router dropped because the
format was bad.
This information is used by Foundry customer support.
The number of responses to RIP request packets this router dropped
because the format was bad.
This information is used by Foundry customer support.
The number of RIP responses received from loopback interfaces.
This information is used by Foundry customer support.
Configuring IP
15 - 103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents