Foundry Networks Switch and Router Installation And Configuration Manual page 918

Foundry Switch and Router Installation and Configuration Guide
EXAMPLE:
To change the value to 50 seconds from a default value of 10 seconds, use one of the following methods.
USING THE CLI
BigIron(config)# appletalk rtmp-update-interval 50
Syntax: appletalk rtmp-update-interval <1-3600>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Click on the General link to display the AppleTalk configuration panel.
5. Enter a new RTMP update interval from 1 – 3600 in the RTMP Update Interval field. For this example, enter
50.
6. Click the Apply button to apply the change to the device's running-config file.
7. Select the Save link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device's flash memory.
AppleTalk ZIP Query Interval
You can change the ZIP query interval to modify how often the router retransmits ZIP query messages. Possible
values are from 1 – 1000 seconds. The default is 10 seconds.
EXAMPLE:
To change the ZIP query interval to 30 seconds from the default value (10 seconds), use one of the following
methods.
USING THE CLI
BigIron(config)# appletalk zip-query-interval 30
Syntax: appletalk zip-query <1-1,000>
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
4. Click on the General link to display the AppleTalk configuration panel.
5. Enter a new ZIP query interval from 1 – 1000 in the ZIP Query Interval field. For this example, enter 30.
6. Click the Apply button to apply the change to the device's running-config file.
7. Select the Save link at the bottom of the dialog, then select Yes when prompted to save the configuration
change to the startup-config file on the device's flash memory.
Displaying AppleTalk Information
You can use the CLI or the Web management interface to display configuration information and statistics for
AppleTalk.
USING THE CLI
When using the CLI, you can access information about AppleTalk by entering the following show commands.
24 - 20 December 2000