Foundry Networks Switch and Router Installation And Configuration Manual page 1018

Foundry Switch and Router Installation and Configuration Guide
continued from previous page
eq
udp
gt
lt
neq
range
ip access-policy-group
Figure 26.3 IP access policy syntax (2 of 2)
USING THE WEB MANAGEMENT INTERFACE
To add an IP access policy:
1. Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to IP in the tree view to expand the list of IP option links.
4. Click the Access Policy link.
• If the device does not have any IP access policies, the IP Access Policy configuration panel is displayed,
as shown in the following example.
• If an IP access policy is already configured and you are adding a new policy, click on the Add IP Access
Policy link to display the IP Access Policy configuration panel, as shown in the following example.
• If you are modifying an existing IP access policy, click on the Modify button to the right of the row
describing the policy to display the IP Access Policy configuration panel, as shown in the following
example.
C - 14
bootpc | bootps |
dns | tftp |
ntp | radius |
<CR>
radius-old | rip |
snmp | snmp-trap |
<num>
bootpc | bootps | bootpc | bootps |
dns | tftp | dns | tftp |
ntp | radius | ntp | radius |
radius-old | rip | radius-old | rip |
snmp | snmp-trap | snmp | snmp-trap |
<num> <num>
in
<policy-list>
out
<CR>
<CR>
December 2000