Displaying The Ipx Route Table - Foundry Networks Switch and Router Installation And Configuration Manual

Foundry Switch and Router Installation and Configuration Guide
This Field...
Router
Out-Filter
Frame-Type
Port
USING THE WEB MANAGEMENT INTERFACE
To display the IPX forwarding cache:
1. Log on to the device using a valid user name and password for read-only or read-write access. The System
configuration dialog is displayed.
2. Click on the plus sign next to Monitor in the tree view to display the list of monitoring options.
3. Click on the plus sign next to IPX in the tree view to expand the list of IPX option links.
4. Click on the Cache link.

Displaying the IPX Route Table

To display the IPX route table, use one of the following methods.
USING THE CLI
To display the IPX route table, enter the following command at any CLI level:
BigIron> show ipx route
Total number of IPX route entries 3
Forwarding
Index Network
1 11110007
2 32D564FA
3 11110005
Syntax: show ipx route [<num(hex)>]
The <num(hex)> parameter lets you specify an IPX network number.
23 - 20
Table 23.3: CLI Display of IPX Forwarding Cache (Continued)
Displays...
The MAC address of the next-hop IPX router. If the destination is
local, the address is shown as all zeros.
Whether an outbound filter is configured for traffic to the destination
network number or node. The value can be one of the following:
•
•
The frame encapsulation type, which can be one of the following:
• Ethernet SNAP
• Ethernet 802.2
• Ethernet 802.3
• Ethernet II
The port through which the Layer 3 Switch sends traffic to the
destination network and node.
Router Hops
0000.0000.0000
00a0.24bf.89ca
0000.0000.0000
No
Yes
Ticks Port
0 1 7
1 2 5
0 1 5
December 2000