Foundry Networks Switch and Router Installation And Configuration Manual page 404

Foundry Switch and Router Installation and Configuration Guide
5. Change the ACL number in the ACL Number field or use the ACL number displayed in the field.
NOTE: You cannot specify a name.
6. Select the ACL action. You can select Permit or Deny:
• Permit – Forwards traffic that matches the ACL.
• Deny – Drops traffic that matches the ACL.
7. Enter the source IP information. You can enter the source IP address and network mask or the host name.
• If you enter the address, you also must enter the network mask. To specify "all", enter "0.0.0.0".
13 - 16 December 2000