Foundry Networks Switch and Router Installation And Configuration Manual page 1035

Switch and router
Table of Contents

Advertisement

Syntax
Use the following CLI commands or Web management interface panels to configure IPX forwarding filters.
CLI syntax
BigIron(config)# ipx forward-filter <filter-num> permit | deny
<source-network-number> | any <source-node-number> | any
<destination-network-number> | any <destination-node-number> | any
<destination-socket-number> | any
BigIron(config-if-1/1)# ipx forward-filter-group in | out <filter-list>
IPX RIP Filters
IPX RIP filters control the IPX routes that the Foundry device learns or advertises.
Actions
An IPX RIP filter applied to inbound packets learns or drops IPX routes received on the port.
An IPX RIP filter applied to outbound packets advertises or does not advertise IPX routes.
Scope
You configure IPX RIP filters globally, then apply them to specific ports.
Syntax
Use the following CLI commands or Web management interface panels to configure IPX RIP filters.
CLI syntax
BigIron(config)# ipx rip-filter <filter-num> permit | deny
<network-number> | any <network-mask> | any
BigIron(config-if-1/1)# ipx rip-filter-group in | out <filter-list>
IPX SAP Filters
IPX Service Advertisement Protocol (SAP) filters control client access to IPX servers.
Actions
An IPX SAP filter applied to inbound packets learns or drops advertisements for the specific services.
An IPX SAP filter applied to outbound traffic advertises or does not advertise services.
Scope
You configure IPX SAP filters globally, then apply them to specific ports.
Syntax
Use the following CLI commands or Web management interface panels to configure IPX SAP filters.
CLI syntax
BigIron(config)# ipx sap-filter <filter-num> permit | deny
<server-type> | any <server-name> | any
BigIron(config-if-1/1)# ipx sap-filter-group in | out <filter-list>
December 2000
Table C.17: IPX Forwarding Filters
Table C.18: IPX RIP Filters
Table C.19: IPX SAP Filters
Policies and Filters
Web management links
Configure->IPX->Forward Filter
Web management links
Configure->IPX->RIP Filter
Web management links
Configure->IPX->SAP Filter
C - 31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents