Foundry Networks Switch and Router Installation And Configuration Manual page 661

This Field...
Notification Message Error Code
Received
Notification Message Error SubCode
Received
Notification Message Error Code
Transmitted
Notification Message Error SubCode
Transmitted
December 2000
MSDP Peer Information (Continued)
Displays...
If the MSDP router receives a NOTIFICATION messages from the
neighbor, the message contains an error code corresponding to one
of the following errors. Some errors have subcodes that clarify the
reason for the error. Where applicable, the subcode messages are
listed underneath the error code messages.
• 1 – Message Header Error
• 2 – SA-Request Error
• 3 – SA-Message/SA-Response Error
• 4 – Hold Timer Expired
• 5 – Finite State Machine Error
• 6 – Notification
• 7 – Cease
For information about these error codes, see section 17 in the Internet
draft describing MSDP, "draft-ietf-msdp-spec".
See above.
The error message corresponding to the error code in the
NOTIFICATION message this MSDP router sent to the neighbor. See
the description for the Notification Message Error Code Received field
for a list of possible codes.
See above.
Configuring IP Multicast Protocols
18 - 35