Foundry Networks Switch and Router Installation And Configuration Manual page 663

This Field...
ReTrans
IRcvSeq
RcvNext
RcvWnd
TotalRcv
RcvQue
SendQue
USING THE WEB MANAGEMENT INTERFACE
You cannot display MSDP information using the Web management interface.
Displaying Source Active Cache Information
To display the Source Actives in the MSDP cache, use the following CLI method.
BigIron(config-msdp-router)# show ip msdp sa-cache
Total Entry 4096, Used 1800 Free 2296
Index SourceAddr
1 (100.100.1.254, 232.1.0.95), RP:206.251.17.41, Age:0
2 (100.100.1.254, 237.1.0.98), RP:206.251.17.41, Age:30
3 (100.100.1.254, 234.1.0.48), RP:206.251.17.41, Age:30
4 (100.100.1.254, 239.1.0.51), RP:206.251.17.41, Age:30
5 (100.100.1.254, 234.1.0.154), RP:206.251.17.41, Age:30
6 (100.100.1.254, 236.1.0.1), RP:206.251.17.41, Age:30
7 (100.100.1.254, 231.1.0.104), RP:206.251.17.41, Age:90
8 (100.100.1.254, 239.1.0.157), RP:206.251.17.41, Age:30
9 (100.100.1.254, 236.1.0.107), RP:206.251.17.41, Age:30
10 (100.100.1.254, 233.1.0.57), RP:206.251.17.41, Age:90
Syntax: show ip msdp sa-cache
This display shows the following information.
This Field...
Total Entry
Used
Free
Index
SourceAddr
GroupAddr
December 2000
MSDP Peer Information (Continued)
Displays...
The number of sequence numbers that the MSDP router
retransmitted because they were not acknowledged.
The initial receive sequence number for the session.
The next sequence number expected from the neighbor.
The size of the receive window.
The number of sequence numbers received from the neighbor.
The number of sequence numbers in the receive queue.
The number of sequence numbers in the send queue.
GroupAddr
MSDP Source Active Cache
Displays...
The total number of entries the cache can hold.
The number of entries the cache currently contains.
The number of additional entries for which the cache has room.
The cache entry number.
The IP address of the multicast source.
The IP multicast group to which the source is sending information.
Configuring IP Multicast Protocols
Age
18 - 37