Foundry Networks Switch and Router Installation And Configuration Manual page 895

This display shows the following information.
This Field...
Total number of IPX route entries
Index
Network
Router
Hops
Ticks
Port
USING THE WEB MANAGEMENT INTERFACE
To display the IPX route table:
1. Log on to the device using a valid user name and password for read-only or read-write access. The System
configuration dialog is displayed.
2. Click on the plus sign next to Monitor in the tree view to display the list of monitoring options.
3. Click on the plus sign next to IPX in the tree view to expand the list of IPX option links.
4. Click on the Route link.
Displaying the IPX Server Table
To display the IPX server table, use one of the following methods.
USING THE CLI
To display the IPX server table, enter the following command at any CLI level:
BigIron> show ipx servers
Total number of IPX server entries 3
Index Network
1 32D564FA
Server-name: FoundryD
2 32D564FA
Server-name: FoundryM
3 32D564FA
Server-name: Foundry-MPR2
Syntax: show ipx servers [<name>]
The <name> parameter lets you specify a server name.
December 2000
Table 23.4: CLI Display of IPX Route Table
Displays...
The number of entries in the table.
The index number of the table entry.
The IPX network at the route's destination.
The MAC address of the next-hop IPX router.
The number of hops (routers) separating the Foundry Layer 3 Switch
from the network.
The number of ticks.
The port through which the Layer 3 Switch sends traffic to the
destination network.
Node Socket
0000.0000.0001 0005
0000.0000.0001 4006
0000.0000.0001 0451
Type Hops
026B 1
0278 1
0004 1
Configuring IPX
23 - 21