Foundry Networks Switch and Router Installation And Configuration Manual page 896

Foundry Switch and Router Installation and Configuration Guide
This display shows the following information.
This Field...
Index
Network
Node
Socket
Type
Hops
Server-name
USING THE WEB MANAGEMENT INTERFACE
To display the IPX server table:
1. Log on to the device using a valid user name and password for read-only or read-write access. The System
configuration dialog is displayed.
2. Click on the plus sign next to Monitor in the tree view to display the list of monitoring options.
3. Click on the plus sign next to IPX in the tree view to expand the list of IPX option links.
4. Click on the Server link.
Displaying IPX Traffic Statistics
To display IPX traffic statistics, use one of the following methods.
USING THE CLI
To display IPX traffic statistics, enter the following command at any CLI level:
BigIron> show ipx traffic
Port Forward
1/5 46
1/7 0
Tot 46
Syntax: show ipx traffic
This display shows the following information.
This Field...
Port
Forward
Receive
23 - 22
Table 23.5: CLI Display of IPX Server Table
Displays...
The index number of the table entry.
The network in which the server is located.
The six-byte node number. The node number can be a MAC address
or, for some IPX server types, a "1".
The two-byte socket number.
The two-byte number for the server type.
The number of IPX router hops to the server's network.
The IPX server name.
Receive Transmit
36 8
0 6
36 14
Table 23.6: CLI Display of IPX Traffic Statistics
Displays...
The port for which the statistics apply. Only the ports that have IPX
interfaces configured on them are listed.
The number of IPX packets received by the Layer 3 Switch from
another device and then sent on the port.
The number of IPX packets received on the port.
Dropped
Receive Transmit
2 0
0 0
2 0
Filtered
Receive Transmit
0 0
0 0
0 0
December 2000