Foundry Networks Switch and Router Installation And Configuration Manual page 909

FieldService
Zone
AppleTalk Addresses Assigned to Ports
Port 1 = 200.50
Port 3 = 100.50
Port 10 = 600.50
Port 13 = 300.50
Port 14 = 500.50
Port 15 = 400.50
Figure 24.2 AppleTalk zones in a network
EXAMPLE:
Suppose you want to deny access to the Finance server to users within the Marketing and Field Service zones on
the network, as shown in Figure 24.2. To define a zone filter for this, use one of the following methods.
USING THE CLI
BigIron(config)# interface e1
BigIron(config-if-1)# appletalk deny zone finance
BigIron(config-if-1)# int e3
BigIron(config-if-3)# appletalk deny zone finance
BigIron(config-if-3)# int e13
BigIron(config-if-13)# appletalk deny zone finance
BigIron(config-if-13)# int e15
BigIron(config-if-15)# appletalk deny zone finance
USING THE WEB MANAGEMENT INTERFACE
1. Log on to the device using a valid user name and password for read-write access. The System configuration
dialog is displayed.
2. Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3. Click on the plus sign next to AppleTalk in the tree view to expand the list of AppleTalk option links.
December 2000
AppleTalk
...
Port 3
100.50
Apple
Server
Network 200
200.50 300.50
Port 1 Port 13
Link Link
Activity Activity
Console
Power
Port 10
600.50
...
Marketing Zone
FieldService Zone
Network 300
...
Network 400
AppleTalk
400.50
Port 15
NetIron
Port 14
500.50
Apple
Network 500
Server
...
AppleTalk
Network 600
Configuring AppleTalk
Marketing
Zone
Finance
Zone
24 - 11