Interface Ip Parameters - Layer 2 Switches - Foundry Networks Switch and Router Installation And Configuration Manual

Foundry Switch and Router Installation and Configuration Guide
Interface IP Parameters – Layer 2 Switches
Table 15.4 lists the interface-level IP parameters for Layer 2 Switches.
Parameter Description
DHCP gateway You can configure a list of DHCP stamp addresses for
stamp a port. When the port receives a DHCP/BootP
Discovery packet from a client, the port places the IP
address(es) in the gateway list into the packet's
Gateway field.
15 - 18
Table 15.4: Interface IP Parameters – Layer 2 Switches
Default See page...
None configured 15-82
December 2000