Foundry Networks Switch and Router Installation And Configuration Manual page 122

Foundry Switch and Router Installation and Configuration Guide
This Field...
State
Username
The show who command also displays information about SSH connections. For example:
BigIron#show who
Console connections:
established, active
Telnet connections:
1 closed
2 closed
3 closed
4 closed
5 closed
SSH connections:
1 established, client ip address 209.157.22.8
16 seconds in idle
2 established, client ip address 209.157.22.21
42 seconds in idle
3 established, client ip address 209.157.22.68
49 seconds in idle
4 closed
5 closed
Syntax: show who
To terminate one of the active SSH connections, enter the following command:
BigIron# kill ssh 1
Syntax: kill ssh <connection-id>
4 - 8
Table 4.1: SSH Connection Information (Continued)
Displays...
The connection state. This can be one of the following:
0x00 Server started to send version number to client.
0x01 Server sent version number to client.
0x02 Server received version number from client.
0x20 Server sent public key to client.
0x21 Server is waiting for client's session key.
0x22 Server received session key from client.
0x23 Server is verifying client's session key.
0x24 Client's session key is verified.
0x25 Server received client's name.
0x40 Server is authenticating client.
0x41 Server is continuing to authenticate client after one or more
failed attempts.
0x80 Server main loop started after successful authentication.
0x81 Server main loop sent a message to client.
0x82 Server main loop received a message from client.
The user name for the connection.
December 2000