Foundry Networks Switch and Router Installation And Configuration Manual page 652

Foundry Switch and Router Installation and Configuration Guide
BigIron(config-pim-router)# show ip pim flowcache
Source
1 209.157.24.162
2 209.157.24.162
3 209.157.24.162
4 209.157.24.162
Syntax: show ip pim flowcache
This display shows the following information.
This Field...
Source
Group
Parent
CamFlags
CamIndex
Fid
Flags
USING THE WEB MANAGEMENT INTERFACE
You cannot display the PIM flow cache using the Web management interface.
Displaying the PIM Multicast Cache
To display the PIM multicast cache, use the following CLI method.
USING THE CLI
To display the PIM multicast cache, enter the following command at any CLI level:
BigIron(config-pim-router)# show ip pim mcache
1 (*,239.255.162.1) RP207.95.7.1 forward port v1, Count 2
member ports ethe 3/3
virtual ports v2
prune ports
virtual prune ports
2 (209.157.24.162,239.255.162.4) forward port v2, flags 00004900 Count 130
member ports
virtual ports
prune ports
virtual prune ports
3 (209.157.24.162,239.255.162.1) forward port v2, flags 00005a01 Count 12
member ports ethe 3/8
virtual ports
prune ports
virtual prune ports
Syntax: show ip pim mcache
18 - 26
Group Parent CamFlags CamIndex
239.255.162.1 v2
239.255.162.1 v2
239.255.162.1 v2
239.255.162.1 v2
Displays...
Indicates the source of the PIM Sparse group.
Indicates the PIM Sparse group.
Indicates the port or virtual interface from which the Layer 3 Switch
receives packets from the group's source.
This field is used by Foundry technical support for troubleshooting.
This field is used by Foundry technical support for troubleshooting.
This field is used by Foundry technical support for troubleshooting.
This field is used by Foundry technical support for troubleshooting.
Fid
00000700 2023 00004411 F
00000700 201b 00004411 F
00000700 201d 00004411 F
00000700 201e 00004411 F
Flags
December 2000