Foundry Networks Switch and Router Installation And Configuration Manual page 993

This Field...
Name
IP
State
Displaying Keepalive Information
To display the keepalive parameters in effect for the application ports on the servers, enter the following command
at any level of the CLI:
Syntax: show server keepalive-port
December 2000
Table 26.1: Real Server Information (Continued)
Displays...
The name of the real server. This is the name you assigned to the
server when you configured it on the ServerIron.
The IP address of the real server.
If you configured a host range of VIPs on the server, the number
following the IP address (after the colon) is the number of hosts on the
server.
The state of the real server. The state can be one of the states listed
by "Server State" at the top of the display.
Route Health Injection
26 - 9