Foundry Networks Switch and Router Installation And Configuration Manual page 66

Foundry Switch and Router Installation and Configuration Guide
Table 3.1: Ways to secure management access to Foundry devices (Continued)
Access method
Access to the Privileged EXEC
and CONFIG levels of the CLI
Telnet access
Secure Shell (SSH) access
3 - 2
How the access Ways to secure the access method
method is secured
by default
Not secured Establish a password for Telnet access to the
CLI
Establish passwords for management privilege
levels
Set up local user accounts
Configure TACACS/TACACS+ security
Configure RADIUS security
Not secured Regulate Telnet access using ACLs
Allow Telnet access only from specific IP
addresses
Allow Telnet access only to clients connected
to a specific VLAN
Disable Telnet access
Establish a password for Telnet access
Establish passwords for privilege levels of the
CLI
Set up local user accounts
Configure TACACS/TACACS+ security
Configure RADIUS security
Not configured Configure SSH
Establish passwords for privilege levels of the
CLI
Set up local user accounts
Configure TACACS/TACACS+ security
Configure RADIUS security
See
page
3-9
3-10
3-12
3-18
3-33
3-4
3-5
3-6
3-7
3-9
3-10
3-12
3-18
3-33
4-1
3-10
3-12
3-18
3-33
December 2000