Foundry Networks Switch and Router Installation And Configuration Manual page 424

Foundry Switch and Router Installation and Configuration Guide
Total rate-limited interface count: 6.
Port Input rate
1/1
2/1
2/2
2/3
2/4
2/5
Syntax: show rate-limiting fixed
This display shows the following information.
This Field...
Total rate-limited interface count
Port
Input rate
RX Enforced
Output rate
TX Enforced
14 - 4
RX Enforced
500000 3
Table 14.2: CLI Display of Fixed Rate Limiting Information
Displays...
The total number of ports that are configured for Fixed Rate Limiting.
The port number.
The maximum rate allowed for inbound traffic. The rate is measured
in bits per second (bps).
The number of one-second intervals in which the Fixed Rate Limiting
policy has dropped traffic received on the port.
The maximum rate allowed for outbound traffic. The rate is measured
in bps.
The number of one-second intervals in which the Fixed Rate Limiting
policy has dropped traffic queued to be sent on the port.
Output rate TX Enforced
1234567
2222222
1234567
1238888
1238888
100
3
15
12
7
December 2000