Flash; Pulse To Tone Conversion; Camp-On (Trunk Queuing) - NEC AK-308 User Manual

Trunk Outgoing Call

Flash

Flash allows you to access certain features of the telephone company or PBX to which your telephone system
is connected. This lets you take full advantage of whether features the connected telephone company or
PBX offers. Flash accesses these features by momentarily interrupting the loop current on your outside line.
This is much like briefly pressing and then releasing the hookswitch on your telephone at home.

Pulse to Tone Conversion

Pulse to Tone Conversion allows you to change from Dial Pulse to Tone (DTMF) dialing mode to access
services such as computer-accessed long distance service.

Camp-On (Trunk Queuing)

When all trunk lines in a particular Queue Group are busy, Camp-On puts you on a "waiting list" for an
available line in the group. As soon as a line becomes free, your phone rings and a Line key flashes. Up to
eight extension users can activate Camp-On in the same Queue Group. When signaled, you must answer
within 20 sec, otherwise the line rings the next extension on the "waiting list".
10
1. Press
1. Flash Hookswitch.
2. Dial 90.
1. Dial phone number. (Pulse mode).
2. Dial
3. Dial phone number. (Tone mode).
To use Camp-On:
1. Lift handset.
2. Press
3. Dial Queuing Group number (0-6) (0: Same group, 1- 6:
4. Replace handset.
1. Place an outside call. Hear busy tone.
2. Dial Queuing Group number (0-6) (0: Same group, 1- 6:
3. Replace handset.
When Camp-On rings an extension:
1. Lift handset.
2. Press flashing
1. Lift handset.
- On the CO/PBX line
FLASH
key.
- On the CO/PBX line
# .
key.
HOLD
Group No.).
- If you hear busy tone, the extension can not use Camp-
On for that group.
Group No.).
LINE
key.