Mazda CX-7 2007 Workshop Manual page 1724

IGNITION SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the column cover. (See 09-17-8 COLUMN COVER REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1 Connector
2 Screw
3 Ignition switch
4. Install in the reverse order of removal.
End Of Sie
IGNITION SWITCH INSPECTION
1. Verify that the continuity between the ignition
switch terminals is as indicated in the table.
• If not as indicated in the table, replace the
ignition switch.
Ignition key
position
E F
LOCK
ACC
ON
START
End Of Sie
WM: KEY REMINDER SWITCH KEY REMINDER SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the column cover. (See 09-17-8 COLUMN COVER REMOVAL/INSTALLATION.)
3. Disconnect the key reminder switch connector.
4. Remove the key reminder switch.
5. Install in the reverse order of removal.
End Of Sie
09-21–2
POWER SYSTEMS
: Continuity
Terminal
D C B A
acxuuw00002095
2
1
E F
START
START
LOCK
ON
ACC ON
ACC
C D A B
STEERING LOCK
id092100800200
3
acxuuw00002093
id092100800100
E
A
C
D B
F
LOCK
acxuuw00002094
id092100801000
KEY REMINDER
SWITCH
acxuuw00002096