BEFORE YOU BEGIN
Check package contents
Whether you have purchased a system with one or multiple TalkSwitch units, each
package you receive should include the following:
Ensure that you have the minimum system requirements
You will need a PC to configure your TalkSwitch. Ensure that your PC meets the
following minimum system requirements:
•
•
•
•
Network equipment: If your system includes multiple TalkSwitch units, you will
need an Ethernet switch. If you plan on using VoIP or configuring your system
remotely, you will need an Ethernet switch (or router with an integrated switch)
and a broadband Internet connection.
Check your premises telephone wiring
TalkSwitch doesn't require telephone wiring beyond the standard infrastructure in
most commercial and residential buildings. If your premises requires additional
wiring, consult an authorized TalkSwitch reseller in your area.
Important! Lightning and electrical surges can cause damage to the TalkSwitch unit. We
recommend using surge protection equipment on all external telephone and power lines
connected to this device.
2
Windows Vista (32 bit), XP, 2000 operating system
120 MB free hard disk space
256 MB RAM
800x600 video resolution
•
TalkSwitch unit
•
TalkSwitch Configuration Software CD
•
AC adapter
•
RJ-11 telephone cables
(1 for each incoming line)
•
RJ-45 Ethernet cable or USB cable
(for 24-CA)
•
Quick Reference Cards for each extension
•
Wall mounting template, screws and
anchors for optional wall-mounting of
your TalkSwitch unit.
T A L K S W I T C H S T A R T G U I D E