Configuring Wep Using The W310 Manager - Avaya W310 User Manual

Chapter 12 W310 WLAN Gateway Wireless Features
12. Exit W110 (LAP) mode and copy the running configuration to the startup configuration.
This saves and re-executes the settings specified in this procedure.
W310-1(super/LAP port-16)# exit
W310-1(super)# copy running startup
Beginning copy operation ...
This operation may take up to 20 seconds.
Please refrain from any other operation during this time.
For more information, use 'show copy status' command
W310-1(super)#

Configuring WEP Using the W310 Manager

1. Create a Service Set Identifier (SSID). This is done as follows
a Click on the Wireless tab in the W310 Manager.
b Click on the
c Click the Insert button at the bottom of the SSID Table dialog. A new column
appears in the table.
d Enter the name, for example, engineering@companya into the Name column.
2. In the SSID Table, enable broadcast and disable closed system for the new SSID.
a Optional: Click on the Broadcast column and select Enable from the drop-down
menu.
b Click on the Closed System column and select Disable from the drop-down menu.
180
icon to bring up the SSID Table. The SSID Table displays.
Avaya W310 User's Guide