Ethernet Configuration Cli Commands - Avaya W310 User Manual

Ethernet Configuration CLI Commands

The following table contains a list of the configuration CLI commands for the Ethernet
feature. The rules of syntax and output examples are all set out in detail in the Avaya W310
CLI Reference Guide.
Table 11.1
In order to...
Set the auto negotiation mode of a port
Administratively enable a port
Administratively disable a port
Set the speed for a 10/100 port
Configure the duplex mode of a
10/100BASE-T port
Configure a name for a port
Set the send/receive mode for flow-
control frames for a full duplex port
Set the flow control advertisement for a
Gigabit port when performing
autonegotiation
Set the priority level of a port
Display settings and status for all ports
Display per-port status information
related to flow control*
Display the flow control advertisement
for a Gigabit port used to perform auto-
negotiation*
Display the CAM table entries for a
specific port
Clear all the CAM entries.
Display the autopartition settings
Avaya W310 User's Guide
Configuration CLI Commands for Ethernet Feature
Chapter 11 W310 WLAN Gateway Layer 2 Features
Use the following command...
set port negotiation
set port enable
set port disable
set port speed
set port duplex
set port name
set port flowcontrol
set port auto-negotiation-flowcontrol-
advertisement
set port level
show port
show port flowcontrol
show port auto-negotiation-
flowcontrol-advertisement
show cam
clear cam
show autopartition
63