Ingress Vlan Security; Vlan Cli Commands - Avaya W310 User Manual

Ingress VLAN Security

When a VLAN-tagged packet arrives at a port, only the packets with the VLAN tag
corresponding to the VLANs which are configured on the port will be accepted. Packets with
other VLAN tags will be dropped.

VLAN CLI Commands

The following table contains a list of the CLI commands for the VLAN feature. The rules of
syntax and output examples are all set out in detail in the W310 CLI Reference Guide.
Table 11.3
In order to...
Assign the Port VLAN ID (PVID)
Define the port binding method
Define a static VLAN for a port
Configure the tagging mode of a port
Create VLANs
Display the port VLAN binding mode
settings
Display VLAN tagging information of
the ports, port binding mode, port
VLAN ID and the allowed VLANs on
a port
Display the VLANs configured in the
switch.
Clear VLAN entries
Clear a VLAN statically configured on
a port
Clear the dynamic vlans learned by the
switch from incoming traffic
Avaya W310 User's Guide
VLAN CLI Commands
Chapter 11 W310 WLAN Gateway Layer 2 Features
Use the following command...
set port vlan
set port vlan-binding-mode
set port static-vlan
set trunk
set vlan
show port vlan-binding-mode
show trunk
show vlan
clear vlan
clear port static-vlan
clear dynamic vlans
71