Avaya W310 User Manual page 176

Chapter 12 W310 WLAN Gateway Wireless Features
In order to...
Enable or disable a closed system. If
broadcast is enabled, then closed
system must be disabled.
Set the authentication and encryption
(security) mode
For WEP security mode only:
Set the WEP encryption for the
encryption key
Set which WEP encryption key to use -
1, 2, 3 or 4
Set WEP keys in hexadecimal format
rather than the default of ASCII
For WPA, WPA-PSK or 802.1x security mode:
Set the encryption rekeying interval for
802.1x or WPA
Set the WPA-PSK pass-through phrase
150
If closed-system is
enabled (not-accept-
any), the setting of the
broadcast command has
no effect. With closed-
system enabled, this
prevents the SSID from
being broadcast even if
broadcast was enabled.
Use the following command...
closed-system
security-mode
wep-encryption-key
wep-encryption-key-effective
wep-keys-format
dynamic-rekeying-interval
wpa-psk pass
Avaya W310 User's Guide